Gary Bowser (@Bowser_GaryOPA) header
Gary Bowser (@Bowser_GaryOPA) profile picture

My company Oasis Pensive Abacutors, produces retro computing and gaming products and also offers complete cybersecurity management for your websites and company

Toronto, Ontario
Joined June 2023
Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)Photo by Gary Bowser (@Bowser_GaryOPA)
It's finally happening after living with my chronic lymphedema for over 6 years... I have been waiting for a while, but good luck is on my side this month and I was put in contact soon after my VCF Montreal event with a star team of surgeons. So over the course of the next two weeks I will be at the Sunnybrook burn center and they are in the process of rebuilding my whole left leg. I survived the first operation today, and they already removed over 30 pounds of dead weight in my leg, now I am in the recovery room. I will keep everyone updated on my progress. Thanks again to all my friends and family and those that donated to my GoFundMe without your love and kindness over the last 3 years since I returned to Canada this new chapter in the restart of my life would had never happened.
17
2
52
5,001
Dinner time again at Sunnybrook
2
26
They moved me back to the bed. Tomorrow we are going for a short walk. I got my laptop setup now.
2
40
My first short physio session is over. Getting up and switching to my chair. My leg feels so lite when moving it. Some pain in my knee when bending my leg and my ankle doesn't move very well. But more physio will help. For now they are doing some flexing of my leg while in my chair. Going to last about an hour. Then it's back to my bed.
1
3
41
The cast and top dressing have been removed. And I am going to have a small physio therapy session later on. Day 2 of recovery on a foggy Saturday morning.
2
40
The selection of hospital tv channels Sucks. They are using a very crappy rogers package. But I just remembered I can watch my bell tv and my streaming services from my phone. And from the laptop when I set it up tomorrow after the first physio session.
3
50
Big filling beef stew for dinner, as I need to rebuild all my fluids, they didn't use any blood donations during the surgery. I was hoping bed rest would be over after 24 hours. But I need to wait until the physio therapist arrives tomorrow to officially see how well I can move and get out of my bed and transfer to the chair.
4
43
Signed the terms and conditions paperwork and now I am on the Sunnybrook wifi.
2
49
My sister just got back from her horse conference... Which unfortunately was too close to vcf Montreal so she couldn't attend.
39
Finished my lunch. I forgot to take a photo. Chicken noodle soup. Tuna sandwich. Orange. Baby carrots with hummus dip. Crackers, Muffin. Tea.
3
55
Pain is gone since early this morning. And no more iv drip. And my first lite meal, last night all I got was a super strong protein drink with some magnesium shots as my blood test showed my magnesium was very low.
8
106
Day 1 of recovery. Now 830am.. I had a good rest, but I still need more rest. Around 330pm my official 24 hours of rest is over and then some monitoring will be removed, and I will have bit more freedom, like peeing normally. The night nurse did notice when I was sleeping my oxygen level would dip a bit and recover quickly. Most likely from snoring. So at some point I need to get that fixed. Sleep apnea? (Maybe) A little not much. So after all my recovery is done I should setup an appointment to test for it.
1
3
81
VCF Montreal v2.0 - Gary Bowser (GaryOPA) Keeping the TI-99/4A Alive: Community, Modern Hardware, and the AI-Assisted Future youtube.com/watch?v=jZt8oWPL… Originally livestreamed on Sunday at VCF. I had many discussions during the 3 days, and thanks to everyone that attended in-person.
1
2
5
474
First day was very busy at VCF Montreal v2.0 is now over. Now to relax and get ready for my big TI99 speech early tomorrow morning...
5
4
32
1,543
Well on the train heading to VCF Montreal... Looking forward to meeting everyone... Lots of cool stuff to see at our table... And if you can't attend, at least TuneIn to my speech Sunday morning...
3
23
492
GaryOPA Presents Restoration of a TI Dimension 4 Engineering Prototype youtube.com/watch?v=u0wg2kwW… ​Before the TI-99/4A and /4, Texas Instruments was working on the TI Dimension 4 during the mid '70s as their first Home Computer... Today, we are going to restore one of the early 1977 "engineering prototypes", so we can see how it works, and what we lost, as a number of features got removed for the consumer release of the /4 in 1979. First off, I made this 28 minute video for recent Chicago Fair as exclusive, now that their show is over, I am publishing it for all to enjoy that didn't attend the Chicago Fair yesterday. The video is at points a little boring, you may want to watch it at 1.25x or 1.5x speed, if sitting thru bad camera work and low audio with me running my techie mouth too much is too long for you. Some key points about my TI Dimension 4 prototype it is marked #172 (but I don't know what Engineer owed it at TI, but sadly he died recently, and lucky enough his family had estate sale in Texas, and I lucked out and was able to purchase it at fairly decent price with a bunch of other TI Promo items, another /4a console, some tapes, and prototype of Speech unit and Editor cart.) Besides the YT video below, I have also attached some screenshots of the unit, and thanks to Tursi I have a special patched version of his amazing Classic99 basically working now, allowing me to use the dumped GROMs and ROM's from the system, as one of the first things I did was do a full dump of the main stuff, before I turned it on, just incase it went to the magical smoke heaven. The reason Classic99 had to be patched is even tho it uses the same horrible keyboard as the /4 console, it is not connected the same way, in fact its more faster system, in our beloved /4a and in /4 you tell the 9901 what row you want to read, wait a bit for it settle, and then read back the column via the 9901 to find out what key is pressed. -- On the Dimension 4, address lines are used, so you only need to poll the 9901, the CRU address is latched and that is used to pick the row you want to read, so its faster polling to get the keypress. -- One of the reasons for this, is they needed the other 9901 lines for the 4 player wireless joystick system, which is the main thing i want to re-create based on all the information I have now, I think its very possible in the near future to have nice set of joysticks with the keypad on them, as we now have all the pieces, schematics and pinouts of how this Dimension 4 was wired up, various other papers about the keyboard matrix encoder used on the joysticks, i have a pair of wired prototypes as well with this unit, and of course working dumps which I can now disassembly and document how everything works. The other interesting thing about the TI Dimension 4 is that the DIN 5 plug that we all know as our video/audio connector is not that at all on this prototype, instead it is 3.58mhz clock, Sync, Ext. VDP in, DC control, Ground -- Which allows you to basically hook two consoles together and then the transparent color zero becomes the background of the other tms9918 vdp chip. -- Audio is only available thru the headphone jack in the front, and Video is from an BNC connector on the part, or via the RF Modulator which is on-board the motherboard as well. The final interesting thing is that its made of two boards sandwich together, one of the reasons for this is that they were busy working on TMS9985 CPU, but it wasn't ready at the time, that was going to be the 8-bit version of our 9900 with the 256bytes of ram on the chip, so as such the engineers decided to put all the i/o -- the 8 bit sideport, joystick, the cartridge port, the groms, the sound, the 9901, the keyboard, the rf modulator, cassette port, all on one big board, and then there is 3 rows of connectors, for secondary daughterboard, that contains, the cpu, vdp, ram, rom, and in my prototype the 16 to 8 bit converter since my daughterboard has 9900 cpu on it, along with TMX9918 (prototype vdp) and the 4K of VDP Ram (yes, originally our machines were going to ship with only 4k). --- Now on this daughterboard there is also a secondary expansion port going out the back. -- On the official schematics with the planed TMS9985 cpu, this expansion port was going to be less than cartridge size, and be solely used to expand the vdp ram from 4k to 16k using a little module hanging out the back. - On my prototype the expansion bus is infact bigger, with not only the vdp ram expansion, but a full 16bit access to the 9900 and memory mapping. -- Too bad that was lost in our final version, it would had been interesting to see a TI99 with both 16bit and 8bit buses working together, depending on what you wanted. -- I am going to document this bus more along with control lines and see if we can recreate it with a future new motherboard. -- These 3 rows used to connect an daughterboard could also be used to recreate the "ranger" Z80 version that was designed at least on paper, I never seen one, but we have the schematics for it, so it would be interesting for fun to build that board and see what a TI99 as z80 machine would had been like. Ok, that is enough rambling along, 90% of you will not read all the wordly stuff above, so let's take a look at the video and photos and screenshots of it running in Classic99. -- I will make more videos, and post more information over the next few months, right now my focus over the 11 (yikes only 11 left) days, is to get everything ready for my trip, speech, exhibit to VCF Montreal v2.0. (Hopefully, you can make the trip in-person, or at least watch it online!)
2
14
944
VCF Montreal v2.0 is just around the corner, basically only a month to go, so hopefully we will meet & greet with a lot of fellow retro tech hobbyists during the November weekend 7th & 8th. Besides being a "guest speaker" on Sunday at 9am, I will also be running an Texas Instruments exhibit during the weekend, so looking forward to having discussions with many fans and introducing new people to the wonders of the TI-99/4A and their interesting & unique design. More Info: --> cvcfed.org/vcf-montreal-2-0/ Discover the past, present, and future of the Texas Instruments 16-bit computing legacy at VCF Montreal v2.0. Presented by GaryOPA (also a guest speaker on Sunday at 9am), this exhibit celebrates the enduring hardware ecosystem of the TI-99/4A family by highlighting how modern engineering breathes new life into classic architecture. Attendees will experience three unique systems bridging the gap between 1981 and today. The first system transforms the quintessential home computer experience. It features an original TI-99/4A console heavily enhanced with a JasonACT PiPEB sidecar and a Finalgrom99 cartridge for seamless software loading. The console is upgraded with a Pico9918 Video Display Processor for crystal-clear visuals and an MX-99 mechanical keyboard, offering an unparalleled tactile typing experience. The second build is a robust 99/22 system pushing the platform to its limits. This powerhouse utilizes a Shift838 IO Card and a PEB backplane fully loaded with a MegaRam expansion, an 838FDC floppy controller, a classic Speech Adapter, and a CADD Video Card, demonstrating the incredible expandability of the 99-series environment. Finally, the exhibit leaps forward with a custom, modern ATX motherboard design for the Power Basic Cortex system. Powered by the venerable 16-bit TMS9995 CPU, this build illustrates how retro processors integrate into modern form factors for contemporary development. Join us to explore the thriving hardware scene keeping this platform alive!
1
3
20
1,458
I have amazing enough been selected to be one of the many great retro tech guest speakers at the upcoming VCF Montreal v2.0 two-day event and on Sunday at 9am November 8th 2026, I will be giving a short 30 minute speech with time for Q&A afterwards. For more info on the event please check out this link: cvcfed.org/vcf-montreal-2-0/ Keeping the TI-99/4A Alive: Community, Modern Hardware, and the AI-Assisted Future Born in Montreal in 1969, Gary Bowser — known in the community as GaryOPA — is a hardware and software developer and digital design engineer with over four decades of experience in embedded hardware and low-level machine assembly. Through his companies Oasis Pensive Abacutors and OPA Phoenix Technologies, he builds modern solutions for classic systems: the Texas Instruments TI-99/4A above all, but also MSX, Colecovision/Adam and NABU. Now retired in Toronto and living with chronic lymphedema, he has turned his home into a working laboratory of late-'70s and early-'80s hardware, which he uses daily to develop and test new projects: memory cards, floppy controllers, homebrew cartridges, and the open-sourcing of his original commercial TI-99 software. He develops old-school on original hardware while leveraging modern AI tools and toolchains, hoping to bring a new generation to retro-computing.
4
8
1
46
1,276
Can't believe it is August already, soon it will be Fall here in Canada, and then snow for Christmas 2026. July was crazy month so much stuff finally coming together for me. March of Dimes approved my funding, so I was able to get my condo renovated, to make it better to move around by myself and be less depended on having a PSW everyday. I also got approved for my electric wheelchair and I had to spend a bunch of hard days rearranging my computer desks and making enough space to move around with my new racing neon green hot wheels. With my new hot wheels, I was finally able to go outside for a trip down the street to the corner store by myself, and buy a coffee and relax outside in the park, it was sure good to get outside on my own finally after 3 years, it really helps lift your mental state to be totally "free", (if no stairs). But there is still a lot of work ahead to get my overall health better, and continued push to get proper surgery to my left leg to reduce the lymphatic issues with the end goal to be able to walk by 2027, and not be forced to live out the many years I still have left in a wheelchair. The next test with my new hot wheels, is to see if I can keep my mind focused for longer periods of the day with less overall pain, if so that will be great help to continue my original love and passion in making new retro projects for the Texas Instruments TI-99/4A Home Computers, as before I could only get like at most 6 hours of day of sitting at desk working, before I needed to laydown for the rest of the day to recover. Thanks again everyone for your donations, prayers and good vibes, along with a special shout-out to the Tumblr community that has been very good in their support, hopefully I can now get back to posting more often on social media, now that I got my new hot wheels to ride around in, and take some nice videos to share of the outdoors in my little neck of the woods here in Canada before the snow comes later on this year. -=(GaryOPA)=-
6
2
2
38
2,217