Finished! Hasegawa 1/24 VW Type 2 tribute build for aussie gunpla streamer Deadlight86. His color palette, with custom plate!
ハセガワ 1/24 VW タイプ2 完成!配信者 Deadlight86 さんのカラーでカスタム。レジン製ナンバープレートも自作。
#Hasegawa #ScaleModel #Plamo #VWType2
2
6
119
Body clear is on a 3-week cure. Shifting to the chassis & interior floor, painted to match the black/candy purple exterior.
ボディは3週間乾燥中。外装に合わせ黒&キャンディ紫で塗装した内装フロアとシャシーを進めます!
#Hasegawa #ScaleModel #Plamo #VWType2 #CandyPaint
2
33
4 layers of Gaia EX-Clear (2h flash). Some orange peel & decal bump, but wet-sanding after a 2-3 week cure will level it.
EXクリアを2時間間隔で4層コート。多少のゆず肌や段差は2〜3週間乾燥後のサンディングで平滑化します。
#Hasegawa #ScaleModel #Plamo #VWType2 #CandyPaint
4
139
Masked/sprayed gloss black top. Tape cut to ~0.6mm for curve. Less thinner to stop bleed. Orange peel will level with clears.
上部の黒塗装。R用にテープを0.6mm細切り。滲み防止でシンナー少なめ。ゆず肌ですが後のクリアで平滑化します。
#Hasegawa #ScaleModel #Plamo #VWType2 #CandyPaint
1
98
Candy paint!
Mr. Color SM201 Super Fine Silver 2 + 4 coats of GX107 Clear Purple. Curing before masking the top section! ⏳
キャンディ塗装!
下地はSM201シルバー2、GX107クリアパープルを4層。乾燥後、ツートンの塗り分けに入ります!
#Hasegawa #ScaleModel #Plamo #VWType2 #CandyPaint
2
85
VW Type 2 prep update!
GX Ueno Black, wet sanded & compound polished to a mirror shine before the silver coat.
How do you prep your candy bases?
ウイノーブラック塗装後、中研ぎとコンパウンドで鏡面磨き!次のシルバー用の下地処理です。
#Hasegawa #ScaleModel #Plamo #VWType2 #プラモ
1
87
Hasegawa VW Type 2 Delivery Van prep work!
Sanding down mold lines & laying primer to check for imperfections. Slow work, but prep is everything!
VWタイプ2の表面処理! 削り出しとサフチェック。地道ですが下地が一番大事ですね。
#Hasegawa #ScaleModel #Plamo #VWType2 #プラモデル
3
84
After a decade, I bought a new Godhand GH-PN-120! Old: serial 30XXX
New: 70XXX
→ Over 40,000 units between them.
Thank you!
10年ぶりにGodhand GH-PN-120を新調✨
旧:30XXX 新:70XXX
4万個以上作られてる…
お疲れ様&ありがとう!#Gunpla #ガンプラ #GodHand #ScaleModel #模型
5
125
MSZ-006X-AT Stratoscreamer
High-Altitude Atmospheric Interceptor / Hunter-Killer Prototype
高高度大気圏迎撃機/ハンターキラー試作機
My custom HG Zeta Gundam variant designed for high-altitude interception duties!
#Gunpla #ガンプラ #ガンプラ好きと繋がりたい #Gundam #plamo
🤖 Made with AI
2
15
378
HG Nobel Gundam [Limina Digital Obsidian Edition] submitted to the #Nyakamates Plamo Party last weekend — awesome event! 🔥
Full specs👇
#Gunpla #ガンプラ #ScaleModel #CustomGunpla #CandyPaint
Just finished! Custom build, MSZ-006X-AT Stratoscreamer, a high-altitude interceptor. I went with a custom tan and orange paint scheme.
オリジナル設定の機体『MSZ-006X-AT Stratoscreamer』です。高高度迎撃機というコンセプト
#Gunpla #ガンプラ #ガンプラ好きと繋がりたい #Gundam #plamo
🤖 Made with AI
15
174
Panel liner cleanup almost done — this HG is finally ready for decals! What’s your favorite part of the finishing?
パネルライナーの仕上げほぼ完了、デカール貼り準備OK! 仕上げ工程で一番好きなのは?
#Gunpla #ガンプラ #ガンプラ好きと繋がりたい #Gundam #plamo #gunplabuilder
11
157
It's all about mesh tension. Too loose = fuzzy edges. Too tight = warped panels.
メッシュの張りが命。ゆるすぎるとフワつく、きつすぎると歪む…
#Gunpla #ガンプラ #プラモデル #ScaleModel #Mecha #CandyHex #CustomPaint #GunplaCustom #Gundam #Plamo #nyakamates
Here's how I did the candy hex on the Nobel legs 👇
Wrapped with mesh → sprayed silver → peeled it off.
Mesh tension is everything!
メッシュを使ってヘックス塗装の工程です。
張りを調整してスプレー → 剥がすだけ。
ノーベルの足WIP
1
4
141
And here’s the final result on the Nobel Gundam! 🪑📷Candy hex legs catching the light nicely.
ノーベル完成ショット。メッシュヘックスが光を拾って良い感じです!
#Gunpla #GunplaCustom #CandyHex #メッシュ塗装 #ノーベルガンダム #nyakamates
9
101










































