Prasanthi Basava (@PrasanthiBasava) header
Prasanthi Basava (@PrasanthiBasava) profile picture

COO @ SalesRobot

Joined April 2019
Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)Photo by Prasanthi Basava (@PrasanthiBasava)
Here are 50+ Claude prompts for founders, B2B teams, and agencies. Steal them ↓ 5 shown in full with sample outputs: → Full outbound campaign builder (ICP, list criteria, 5-step email sequence, LinkedIn sequence, objection responses. One chain, 30 minutes) → Cold lead research to first message (paste a profile or company URL, get a buyer breakdown and a personalised opener) → LinkedIn content to pipeline (4-step chain: experience mining, post draft, hook rewrite, lead magnet) → ICP stress test (Claude reads your homepage and tells you who it thinks your customer is. If it can't figure it out, neither can your buyers) → Client campaign brief builder (discovery call notes in, full brief out, ready to send before you start) 50+ more across 7 categories: → ICP and positioning → Cold outreach and campaigns → Lead research and analysis → LinkedIn growth and content → Full agent systems → Agency and client work → Cowork and batching workflows All built and tested on Claude The full Notion doc has every prompt copy-paste ready, sample outputs for each chain step, and the full workflow structures. Comment "VAULT" and I'll send it over.
13
2
2
18
1,859
A 400-lead ICP is a dead end. Here's why. The first few weeks of LinkedIn outbound are spent testing: → Different industries → Different pain points → Different case studies → Different company sizes You need enough prospects to test these variables and find an angle that actually books meetings. With just 400 leads, you could run out of prospects before finding what works. But lead volume is only half the equation. Your average deal size matters too. Before launching a campaign, get two things right: → An ICP with enough leads → A market with enough deal value I broke down the full 7-step process, from picking your ICP to getting qualified meetings on the calendar. Full breakdown in the article below:
3
4
150
Prasanthi Basava retweeted
We almost didn’t launch Kuron. Not because it wasn’t working. Because it might work. Let me explain. For almost five years we’ve run SalesRobot. Talk to customers who cancel and the answer is usually the same. “I didn’t get enough results from cold outreach.” Dig in and it comes down to a few things. The strategy was off. The targeting was off. The message was off. So we asked what happens if AI could fix those three. We have years of data on what good campaigns look like. We know outbound operators willing to share how they actually do it. So we started building Kuron. Then the costs piled up. Weeks of building and redesigning. And a question I couldn’t shake. If this works, do I actually want the company waiting for me on the other side? Because I know what comes after a great demo. The hard part is keeping customers, not winning them. I seriously thought about killing it. Then it hit me that I was arguing with a spreadsheet, not with the market. A real market should get to vote before my founder's anxiety does. So Kuron is live. I don’t care about the signup count. I care whether people come back. Whether they get an outcome. Whether they’d miss it if it was gone. If you try it, tell us honestly. 3k free credits. Link in the comments.
2
2
9
333
One of the biggest mistakes I see agency founders making on LinkedIn: Building an audience of people who want to learn their service instead of people who want to BUY it. Think about the kind of person engaging with your content. You publish a breakdown of how you built a Clay workflow. An aspiring GTM engineer saves it. Another agency owner comments asking for the template. A freelancer sends you a connection request. Great engagement. But none of these people are likely to hire your agency. Now think about the person you actually want to reach. A SaaS founder who has a sales team but can't generate enough qualified pipeline. A VP of Sales struggling to make outbound predictable. A CEO trying to enter a new market without building an entire team from scratch. They don't particularly care how many Clay tables you built. They care whether you can solve their problem. That's the shift I'd make in your content. Stop making your service the subject of every post. Make the problems your service solves the subject. For example: Talk about the cost of the problem. What does inconsistent pipeline do to a company's growth? What happens when a sales team spends its time chasing the wrong accounts? Show how you think, not just what you build. Explain how you identify the right market, spot buying signals, choose an outreach channel and decide which prospects deserve attention. Turn client work into business stories. Don't just share the sequence you wrote or the workflow you built. Explain the original problem, the decisions you made and the business outcome. Have opinions your buyers care about. What are companies getting wrong about outbound? Which growth strategies stop working at a certain stage? What should a founder reconsider before hiring another SDR? Make your expertise relevant to the buyer's situation. A post about generating pipeline for a Series A SaaS company will resonate differently with that founder than a generic post about getting more leads. You don't have to stop sharing tutorials, templates or technical breakdowns. Just understand what they do. They attract people interested in learning your process. Your strategic content should attract people interested in paying you to execute it. The goal isn't to build the biggest audience around your service. It's to become relevant to the people who can actually buy it.
11
9
554
One of our best interviews!
One of our agency customers generated around $60,000 from a single LinkedIn campaign. The campaign achieved a 27% connection acceptance rate and a 41% response rate. She runs a digital marketing agency focused on authority branding, book publishing, SEO and helping businesses attract more clients. Here's how I'd approach LinkedIn if I ran an agency selling authority-building services: 1. Get extremely specific about your target audience Alicia had several potential markets, but two of her main segments were authors and multifamily investors. I'd build separate searches for each audience. For authors, I'd target: → Authors → Speakers → People working on their first book → Professionals looking to build authority through publishing And I'd exclude people who were already bestselling authors or publishers. The goal is to find people who have a reason to need your service, not everyone who happens to fit a broad industry category. 2. Use Boolean searches instead of broad targeting One of Alicia's early mistakes was making her searches too broad. She was booking calls with people who couldn't afford her services, didn't need them or weren't ready to buy. That meant spending hours on conversations that were never going to become clients. I'd use Boolean searches to narrow down: → Job titles and professional roles → Relevant industries → Specific business categories → Exclusions that remove poor-fit prospects A smaller list of relevant buyers is usually more valuable than thousands of loosely matched profiles. 3. Warm up prospects before asking for a conversation Alicia didn't jump straight into a sales pitch. Her sequence included: → Viewing the prospect's profile → Sending a connection request → Engaging with their posts → Sending a short message → Following up through email → Endorsing relevant skills Each interaction gave the prospect another opportunity to recognize her name. By the time she started a conversation, she wasn't just another stranger asking for a meeting. 4. Keep your first message short Alicia's messages were around 10 to 15 words. Her reasoning was simple: Business owners are busy. They don't want to read a paragraph from someone they don't know. I'd focus on: → One clear opening → A natural reason to connect → No unnecessary introduction → No long explanation of your services → An open-ended question that encourages a response She also made an important point: avoid questions that can be answered with a simple yes or no. Give people something to respond to. 5. Build a follow-up process around every conversation This was one of Alicia's strongest recommendations. She said she wished she had followed up more on her original campaign. And it makes sense. A prospect might be interested but busy. They might already have another contract running. They might need more information before making a decision. I'd build follow-ups that: → Revisit the original conversation → Share something relevant to their business → Address a question or objection → Give them a reason to continue the conversation → Create a natural opportunity to get on a call A connection request or reply is the beginning of a sales conversation, not the finish line. 6. Use AI, but keep the personal touch Alicia was positive about using AI for outreach, but she didn't believe it should do everything. I'd use AI to help with: → Prospect research → Identifying relevant business context → Drafting initial messages → Organizing follow-ups → Understanding which prospects deserve more attention But I'd still review the messaging and make sure it sounds like something a real person would say. AI can help with execution. Your understanding of the buyer still matters. 7. Measure the quality of conversations, not just campaign activity Alicia's campaign achieved: → 27% connection acceptance rate → Nearly 41% response rate → Around $60K in revenue, according to Alicia → Additional referrals from the campaign I'd also track: → Qualified conversations → Calls booked and attended → Prospects who match your ICP → Opportunities created → Revenue generated A high response rate means very little if you're speaking to people who will never buy. The objective is to build a pipeline of people who actually need what you sell. That's what stood out to me from Alicia's campaign. She didn't rely on complicated messages or aggressive sales tactics. She got specific about her audience, kept her messaging short, warmed up prospects and understood that follow-up is where many conversations turn into clients. And she did it with a LinkedIn campaign built around a simple principle: Find the right people, give them a reason to respond, and keep the conversation going.
1
34
One of our agency customers generated around $60,000 from a single LinkedIn campaign. The campaign achieved a 27% connection acceptance rate and a 41% response rate. She runs a digital marketing agency focused on authority branding, book publishing, SEO and helping businesses attract more clients. Here's how I'd approach LinkedIn if I ran an agency selling authority-building services: 1. Get extremely specific about your target audience Alicia had several potential markets, but two of her main segments were authors and multifamily investors. I'd build separate searches for each audience. For authors, I'd target: → Authors → Speakers → People working on their first book → Professionals looking to build authority through publishing And I'd exclude people who were already bestselling authors or publishers. The goal is to find people who have a reason to need your service, not everyone who happens to fit a broad industry category. 2. Use Boolean searches instead of broad targeting One of Alicia's early mistakes was making her searches too broad. She was booking calls with people who couldn't afford her services, didn't need them or weren't ready to buy. That meant spending hours on conversations that were never going to become clients. I'd use Boolean searches to narrow down: → Job titles and professional roles → Relevant industries → Specific business categories → Exclusions that remove poor-fit prospects A smaller list of relevant buyers is usually more valuable than thousands of loosely matched profiles. 3. Warm up prospects before asking for a conversation Alicia didn't jump straight into a sales pitch. Her sequence included: → Viewing the prospect's profile → Sending a connection request → Engaging with their posts → Sending a short message → Following up through email → Endorsing relevant skills Each interaction gave the prospect another opportunity to recognize her name. By the time she started a conversation, she wasn't just another stranger asking for a meeting. 4. Keep your first message short Alicia's messages were around 10 to 15 words. Her reasoning was simple: Business owners are busy. They don't want to read a paragraph from someone they don't know. I'd focus on: → One clear opening → A natural reason to connect → No unnecessary introduction → No long explanation of your services → An open-ended question that encourages a response She also made an important point: avoid questions that can be answered with a simple yes or no. Give people something to respond to. 5. Build a follow-up process around every conversation This was one of Alicia's strongest recommendations. She said she wished she had followed up more on her original campaign. And it makes sense. A prospect might be interested but busy. They might already have another contract running. They might need more information before making a decision. I'd build follow-ups that: → Revisit the original conversation → Share something relevant to their business → Address a question or objection → Give them a reason to continue the conversation → Create a natural opportunity to get on a call A connection request or reply is the beginning of a sales conversation, not the finish line. 6. Use AI, but keep the personal touch Alicia was positive about using AI for outreach, but she didn't believe it should do everything. I'd use AI to help with: → Prospect research → Identifying relevant business context → Drafting initial messages → Organizing follow-ups → Understanding which prospects deserve more attention But I'd still review the messaging and make sure it sounds like something a real person would say. AI can help with execution. Your understanding of the buyer still matters. 7. Measure the quality of conversations, not just campaign activity Alicia's campaign achieved: → 27% connection acceptance rate → Nearly 41% response rate → Around $60K in revenue, according to Alicia → Additional referrals from the campaign I'd also track: → Qualified conversations → Calls booked and attended → Prospects who match your ICP → Opportunities created → Revenue generated A high response rate means very little if you're speaking to people who will never buy. The objective is to build a pipeline of people who actually need what you sell. That's what stood out to me from Alicia's campaign. She didn't rely on complicated messages or aggressive sales tactics. She got specific about her audience, kept her messaging short, warmed up prospects and understood that follow-up is where many conversations turn into clients. And she did it with a LinkedIn campaign built around a simple principle: Find the right people, give them a reason to respond, and keep the conversation going.
7
1
2
8
338
Your BEST outbound segment is probably already in your customer database. Teams usually build prospect lists by filtering for industry, company size, job titles and location. But there’s another place worth looking first: Your existing and past customers. Here’s how I’d approach it: 1/ Find the customer segment that actually retains. Look at your customer history and group accounts by: Industry and company size Use case How long they stay How often they use the product You’re looking for a pattern. Which type of customer gets consistent value from your product and sticks around? That’s a much stronger starting point than targeting companies that fit your ICP on paper. 2/ Find more companies that look like them. Once you’ve identified the segment, build a list of similar companies. For example, for SalesRobot, we’d look at B2B companies and agencies scaling LinkedIn outreach. More specifically, teams where multiple reps are actively running outbound. 3/ Look for evidence that they actually need your product. Don’t stop at company fit. Look for signals such as: Hiring for SDR and GTM roles Expanding their outbound team Publishing sales enablement content Running high-volume outreach sequences These signals separate companies that could use your product from companies that have a reason to consider it now. 4/ Focus your campaign on that segment. Now you have a specific segment, the right people, a reason to reach out, and a problem you solve. Build the messaging around that problem, and focus on this segment before expanding into others. That’s how I’d want AI to approach outbound: with a reason behind every recommendation. Try it with your business: kuron.ai/
6
5
193
If I had just 90 days to make outbound your biggest source of meetings, this is the exact GTM system I'd build. I'd split it into three phases. 1. Days 1-30: Fix the offer, ICP and data. Most outbound campaigns struggle before the first message is even sent. I'd start with three things: The offer I'd use Saurav's 3T framework to assess it: → Trust: Do you have customer results or proof that you can deliver this outcome? → Timing: Is the prospect showing signs that they might need this now? → Tactics: Is the actual message relevant, clear and easy to respond to? If the offer is weak or the proof is missing, changing the email copy won't fix it. The ICP I'd analyse your existing customers and identify the ones who are both profitable and genuinely happy. Then I'd map: → Industry and business model → Company size and geography → Specific problem they bought you to solve → Decision-maker title → Common characteristics across your best customers I'd use your strongest customer as the starting point for lookalike prospecting. For niche markets, this can mean using a company database like Ocean.io to find similar businesses, then enriching the list for decision-makers. The buying signals I wouldn't build a static list based on industry and job title alone. I'd add signals such as: → Changed jobs in the last 90 days → Posted on LinkedIn in the last 30 days → Hiring for a role related to your offer → Recently raised funding → Added or removed relevant technology → Attended an industry event → Visited your website, where identifiable A company that fits your ICP and is actively showing a relevant buying signal deserves higher priority than one that simply matches your filters. 2. Days 31-60: Build and test the outbound campaigns. I'd start with two channels: LinkedIn and cold email. But I'd segment the campaigns by audience and trigger. For example: A newly appointed CMO gets a different message from a company hiring five SDRs. A company replacing its CRM gets a different message from one that has just raised funding. Each campaign needs its own reason for reaching out. I'd build the sequences like this: For LinkedIn: → 3-5 steps, with 3-5 days between messages. For cold email: → 4-5 emails, with roughly 3 days between each. And every follow-up needs a new angle. I'd use progressive CTAs: → First message: Ask permission to share more information. → Follow-up: Offer a relevant case study. → Next step: Ask whether a short conversation makes sense. → Later: Ask if someone else handles this. → Final message: Close the loop politely. The first message shouldn't carry the entire campaign. I'd also test 2-3 messaging angles: → Pain: What problem is costing the prospect time or money? → Social proof: How has a similar customer solved it? → Curiosity: What relevant observation could start a conversation? Keep cold emails around 15-50 words and LinkedIn messages to 3-4 lines. One clear CTA per message. 3. Days 61-90: Diagnose, improve and scale. At this stage, I wouldn't simply increase sending volume. I'd look at the numbers and identify exactly where the funnel is breaking. These are the nine metrics I'd track: Connection requests sent Connection acceptance rate First replies Interested replies Discovery calls booked Opportunities created Deals closed Sales cycle length Average deal size Then I'd use the numbers to diagnose the problem: → Low connection acceptance? Review the sender profile and targeting. → Low reply rate? Revisit the list, trigger and messaging. → Replies but very little interest? Reassess the offer and ICP. → Interested replies but few meetings? Review the CTA and follow-up process. → Meetings but no opportunities? Look at qualification and what happens on the sales call. I'd scale the audience and message combinations producing qualified opportunities, and stop spending time on campaigns that generate replies without commercial intent. I'd also keep non-responders out of endless follow-up sequences. After 5-6 cold emails, take a break and approach them later with a fresh reason to reach out. This is the kind of outbound system I'd build with @kuron_ai. Instead of managing prospect research, list building, campaign creation and follow-ups as disconnected tasks, Kuron brings these workflows into one AI-powered GTM process. The goal is to spend less time stitching tools together and more time starting conversations with the right buyers.
2
6
190
How to tell if an “AI agent” for outbound is actually an agent. An AI feature writes the message. An AI agent decides what to do next. Here are 4 tests you can run in 15 minutes to see which one you’re looking at. 1. Can it decide what to do next, or does it wait for instructions? Give it your website and one sentence: “I sell X to Y.” A capable agent should identify potential segments, suggest an angle for each and come back with a campaign plan. If you have to provide the list, copy and steps yourself, it’s doing very little of the actual work. 2. Does it have real GTM context, or is it just pulling public data? Ask it to write five opening lines for your target audience. Check each one. It should mention something you could verify on the prospect’s profile or company, not just a role and an industry. Then ask why it chose those angles and what evidence supports them. If the openers read like ones you’ve seen everywhere, or the “why” is vague, there’s no real context behind them. 3. Does it own the outcome, or just the output? Reply to one of its messages from a test account with: “We already use something.” A good response understands the objection, answers it in a natural tone and moves the conversation forward, without just pushing a calendar link. If the work stops once the message is sent, it owns the output and nothing more. 4. Does it change when you correct it? Tell it one thing that went wrong: “That angle didn’t land with CTOs, stop leading with it.” Then ask for a new draft or plan. A capable agent applies the correction and shows you what it changed. If it ignores the feedback, or you have to re-enter the whole brief, it isn’t learning. That’s what separates an AI agent from an AI feature. Run these 4 tests on any outbound tool, including @kuron_ai And let us know what you find 👀
3
7
138
Your AI GTM employee is finally here!!! Go try it out! Meet Kuron. @kuron_ai can take on the work that goes into running outbound, from figuring out your target audience and researching prospects to building campaigns and handling replies. You bring the business context. Kuron gets to work. No more starting every campaign from a blank page or stitching together multiple tools to get things moving. Give it a task. See what it can do. Try Kuron now: kuron.ai/
3
128
25 decisions that separate a 15% reply rate from a 47%+ one (Every decision falls into 1 of 3 gates) 1️⃣ 𝗚𝗮𝘁𝗲 𝟭: 𝗣𝗶𝗰𝗸 𝘁𝗵𝗲 𝗿𝗶𝗴𝗵𝘁 𝗯𝗮𝘁𝘁𝗹𝗲 Figure out WHO has a reason to respond to you → List quality (one customer attributed 80% of results to it. Copy? 20%.) → Research investment (his team spent 8 hours building a targeted prospect list) → Narrow ICP (target a specific technology stack, not everyone with a software job title) → Buying context (target people who have a reason to consider your offer now) → Hidden demand (one recruiter targeted employed professionals who weren't actively applying for jobs) → Data sources (use industry databases to find people with the exact experience or production history you need) → Buyer vs. user (know whether you're reaching the person who buys, uses or influences the decision) → Budget qualification (don't fill your calendar with people who can't afford your service) 2️⃣ 𝗚𝗮𝘁𝗲 𝟮: EARN 𝘁𝗵𝗲 𝗿𝗲𝗽𝗹𝘆 The goal isn't to squeeze your pitch into someone's inbox. → Warm-up touches (one recruiter used likes, profile views and follows before sending a connection request) → Cross-channel context (one campaign followed an earlier email with a LinkedIn request referencing that email) → Curiosity (make the first interaction relevant enough to earn the next one) → The referral angle (one customer asked prospects who else might benefit from a free trial instead of asking them to buy) → No-pitch opening (start a conversation before introducing the service) → Specific proof (show a result or relevant experience instead of making broad claims) → Headline testing (a brilliant message won't help if the opening never gets read) → Message length (one customer admitted his early messages were way too long) → Follow-up value (every touchpoint should add something, not just ask whether they saw your last message) 3️⃣ 𝗚𝗮𝘁𝗲 𝟯: 𝗧𝘂𝗿𝗻 𝗿𝗲𝗽𝗹𝗶𝗲𝘀 𝗶𝗻𝘁𝗼 𝗼𝗽𝗽𝗼𝗿𝘁𝘂𝗻𝗶𝘁𝗶𝗲𝘀 Getting a reply is not the finish line. → Response speed (one customer cited an 80% higher chance of reaching the next sales step when replying within 5 minutes) → Context-aware replies (if someone asks a question, don't send a generic automated response) → Conversation branching (a referral, objection and positive response need different next steps) → Human handoff (know when a conversation needs a person, not another automated message) → Low-friction next step (one customer deliberately framed the meeting as a focused 15-minute conversation) → Campaign iteration (test different headlines and approaches before scaling) → Winning campaign replication (when something works, repeat it before constantly reinventing it) The takeaway is: Outbound isn't just about how much of an expert you are at copywriting. It's a series of decisions about who to contact, why they'd care, how to approach them and what to do when they respond. @kuron_ai brings those decisions together in one AI GTM team
41
Prasanthi Basava retweeted
I joined SalesRobot without knowing a damn thing about automation, SaaS, or product management. I came from a technical background, spent years at TCS, and built a career I was proud of. Then I left a secure job with no next job lined up. And COVID happened. Years of customer conversations, failed experiments, product demos, and watching a SaaS business grow taught me things I wouldn't have learned otherwise. So if I had to build a SaaS business from scratch today, here are my 2 cents. Full disclosure, I didn't figure everything out alone. People gave me opportunities I wasn't qualified for on paper and trusted me to learn along the way. Here's what I'd focus on if I were starting again. 1/ stop building features before understanding the problem. It's easy to brainstorm features and assume customers will love them. But before building anything, ask: WHO ACTUALLY NEEDS THIS? Talk to customers. Understand their problems, current solutions, and what would make them switch. People saying your idea sounds great doesn't mean they'll pay for it. Find a problem painful enough that people are willing to spend money solving it. 2/ pick a customer segment and get really good at serving them. Your product might serve everyone, but trying to satisfy everyone from day one leads to competing priorities and confusing positioning. Start with a specific audience. Understand their workflows, problems, and buying decisions. Build something that solves their problem exceptionally well. You can expand later. First, give one group a compelling reason to choose you. 3/ your first customers are teaching you how to build the business. I was terrible at sales when I started. I had to learn how to handle objections, build trust, and explain why someone should buy. Customer conversations taught me things I couldn't learn inside the company. Why aren't prospects buying? Why do customers choose competitors? Why do people cancel? Treat sales calls, support tickets, and churn as sources of information. The better you understand customers, the better your decisions about product, positioning, pricing, and acquisition become. 4/ don't confuse getting customers with finding product-market fit. SalesRobot reached $10k MRR within three months of launching. We then pushed for $20k and $30k. We hit $30k MRR four different times. We could reach the milestone, but sustaining growth was a different challenge. Churn, competition, positioning, and retention all matter. Getting customers is one thing. Building a product people keep paying for is another. 5/ a good product needs a good offer. Building a technically impressive product isn't enough. Customers need to understand who it's for, what problem it solves, and why they should choose it over alternatives. "I built an AI-powered sales platform" describes a category, not a reason to buy. If your offer isn't clear, adding more features probably won't fix the problem. 6/ stop assuming a good product will sell itself. I used to believe that working hard and building something good would eventually lead to success. I still believe in good products. But building one and growing a business are different things. People need to discover your product, understand its value, trust your company, and decide to buy. That takes sales, marketing, distribution, and positioning. With AI making software easier to build, giving customers a reason to remember you matters even more. 7/ don't copy competitors just because they're growing faster. A competitor might have better pricing, sharper positioning, or a distribution channel you've yet to figure out. Study what they're doing well, but don't assume copying them will get you the same results. Find underserved customers, ignored problems, and areas where you can do better. You don't need every customer in your category. You need the right customers to have a strong reason to choose you. 8/ don't scale a channel before understanding why it works. When a channel starts working, it's tempting to throw more money and resources at it. But first, understand what's driving results. Which audience responds? Which message converts? Where does revenue come from? Attention doesn't automatically translate into customers, and one successful campaign doesn't guarantee repeatable growth. Document what works, test what doesn't, and scale once you understand the inputs. 9/ stop expecting talent to do all the work. I've always been competitive. I was used to doing well academically and picking things up quickly. Then I struggled with sales, learned new business functions, and figured out product management without prior experience. I realized that understanding something quickly doesn't mean you'll be good at it without practice. You can know sales theory and still struggle on a call. Progress comes from doing the work, getting feedback, and improving through repetition. Talent helps you start. It doesn't replace the work. 10/ build systems that keep working after the initial excitement wears off. Early on, everything is an experiment. You're figuring out what works across product, sales, marketing, and operations. But once something works, make it repeatable. Document successful processes, fix recurring customer problems, and share what your team learns. Turn individual wins into systems that others can follow. Otherwise, you'll keep solving the same problems and rebuilding things you've already figured out. Leaving TCS was one of the most questioned decisions I've made. My father was upset. My relatives thought I'd given up a secure career for no good reason. Then COVID happened, and I spent months without a job. But that period pushed me into business, customer conversations, sales, and eventually product management. I struggled, made mistakes, and learned things I'd never done before. Somewhere along the way, I stopped thinking about my career as a list of responsibilities and started thinking about the bigger problems I could solve. Your job is never just to do the work in front of you. It's to understand what the work is supposed to achieve. If I were building a SaaS business today, I'd focus on understanding customers, building a product they value, figuring out how to reach them, and learning from every mistake. And when something works, understand why before moving on to the next thing.
3
1
6
680
I joined SalesRobot without knowing a damn thing about automation, SaaS, or product management. I came from a technical background, spent years at TCS, and built a career I was proud of. Then I left a secure job with no next job lined up. And COVID happened. Years of customer conversations, failed experiments, product demos, and watching a SaaS business grow taught me things I wouldn't have learned otherwise. So if I had to build a SaaS business from scratch today, here are my 2 cents. Full disclosure, I didn't figure everything out alone. People gave me opportunities I wasn't qualified for on paper and trusted me to learn along the way. Here's what I'd focus on if I were starting again. 1/ stop building features before understanding the problem. It's easy to brainstorm features and assume customers will love them. But before building anything, ask: WHO ACTUALLY NEEDS THIS? Talk to customers. Understand their problems, current solutions, and what would make them switch. People saying your idea sounds great doesn't mean they'll pay for it. Find a problem painful enough that people are willing to spend money solving it. 2/ pick a customer segment and get really good at serving them. Your product might serve everyone, but trying to satisfy everyone from day one leads to competing priorities and confusing positioning. Start with a specific audience. Understand their workflows, problems, and buying decisions. Build something that solves their problem exceptionally well. You can expand later. First, give one group a compelling reason to choose you. 3/ your first customers are teaching you how to build the business. I was terrible at sales when I started. I had to learn how to handle objections, build trust, and explain why someone should buy. Customer conversations taught me things I couldn't learn inside the company. Why aren't prospects buying? Why do customers choose competitors? Why do people cancel? Treat sales calls, support tickets, and churn as sources of information. The better you understand customers, the better your decisions about product, positioning, pricing, and acquisition become. 4/ don't confuse getting customers with finding product-market fit. SalesRobot reached $10k MRR within three months of launching. We then pushed for $20k and $30k. We hit $30k MRR four different times. We could reach the milestone, but sustaining growth was a different challenge. Churn, competition, positioning, and retention all matter. Getting customers is one thing. Building a product people keep paying for is another. 5/ a good product needs a good offer. Building a technically impressive product isn't enough. Customers need to understand who it's for, what problem it solves, and why they should choose it over alternatives. "I built an AI-powered sales platform" describes a category, not a reason to buy. If your offer isn't clear, adding more features probably won't fix the problem. 6/ stop assuming a good product will sell itself. I used to believe that working hard and building something good would eventually lead to success. I still believe in good products. But building one and growing a business are different things. People need to discover your product, understand its value, trust your company, and decide to buy. That takes sales, marketing, distribution, and positioning. With AI making software easier to build, giving customers a reason to remember you matters even more. 7/ don't copy competitors just because they're growing faster. A competitor might have better pricing, sharper positioning, or a distribution channel you've yet to figure out. Study what they're doing well, but don't assume copying them will get you the same results. Find underserved customers, ignored problems, and areas where you can do better. You don't need every customer in your category. You need the right customers to have a strong reason to choose you. 8/ don't scale a channel before understanding why it works. When a channel starts working, it's tempting to throw more money and resources at it. But first, understand what's driving results. Which audience responds? Which message converts? Where does revenue come from? Attention doesn't automatically translate into customers, and one successful campaign doesn't guarantee repeatable growth. Document what works, test what doesn't, and scale once you understand the inputs. 9/ stop expecting talent to do all the work. I've always been competitive. I was used to doing well academically and picking things up quickly. Then I struggled with sales, learned new business functions, and figured out product management without prior experience. I realized that understanding something quickly doesn't mean you'll be good at it without practice. You can know sales theory and still struggle on a call. Progress comes from doing the work, getting feedback, and improving through repetition. Talent helps you start. It doesn't replace the work. 10/ build systems that keep working after the initial excitement wears off. Early on, everything is an experiment. You're figuring out what works across product, sales, marketing, and operations. But once something works, make it repeatable. Document successful processes, fix recurring customer problems, and share what your team learns. Turn individual wins into systems that others can follow. Otherwise, you'll keep solving the same problems and rebuilding things you've already figured out. Leaving TCS was one of the most questioned decisions I've made. My father was upset. My relatives thought I'd given up a secure career for no good reason. Then COVID happened, and I spent months without a job. But that period pushed me into business, customer conversations, sales, and eventually product management. I struggled, made mistakes, and learned things I'd never done before. Somewhere along the way, I stopped thinking about my career as a list of responsibilities and started thinking about the bigger problems I could solve. Your job is never just to do the work in front of you. It's to understand what the work is supposed to achieve. If I were building a SaaS business today, I'd focus on understanding customers, building a product they value, figuring out how to reach them, and learning from every mistake. And when something works, understand why before moving on to the next thing.
3
1
6
680
Get 3x bonuses from us: kuron.ai/waitlist
We let people try Kuron without giving them a walkthrough. Here's what happened. Now a lot of founders would just launch a product and show people exactly how to use it. We wanted to do the opposite. @AshwiniNK21 gave a few people access to Kuron and let them explore it on their own. And we learned something important. People loved that Kuron could scan their website and suggest an ICP. But when one user's ICP returned 0 leads, they immediately felt they needed to broaden their targeting. That's a problem that needs a lil more attention. Because users shouldn't have to guess what to do when the first approach doesn't work. They also surfaced things we hadn't thought enough about: → Someone expected email outreach, not LinkedIn. → Someone wanted Kuron to detect their existing LinkedIn session. → Someone wanted WhatsApp notifications alongside iMessage. None of these were huge, complicated problems. But they changed how people experienced the product. And that's the thing about building with AI. You can spend months making the technology better and better. But if the first few minutes leave someone confused, none of that matters. The product has to work for the person using it, not just the person building it. Sooo that's what we're working with at @kuron_ai. And we're just getting started ;)
18
Early access opening on November 1st sign up now:- kuron.ai/waitlist
We let people try Kuron without giving them a walkthrough. Here's what happened. Now a lot of founders would just launch a product and show people exactly how to use it. We wanted to do the opposite. @AshwiniNK21 gave a few people access to Kuron and let them explore it on their own. And we learned something important. People loved that Kuron could scan their website and suggest an ICP. But when one user's ICP returned 0 leads, they immediately felt they needed to broaden their targeting. That's a problem that needs a lil more attention. Because users shouldn't have to guess what to do when the first approach doesn't work. They also surfaced things we hadn't thought enough about: → Someone expected email outreach, not LinkedIn. → Someone wanted Kuron to detect their existing LinkedIn session. → Someone wanted WhatsApp notifications alongside iMessage. None of these were huge, complicated problems. But they changed how people experienced the product. And that's the thing about building with AI. You can spend months making the technology better and better. But if the first few minutes leave someone confused, none of that matters. The product has to work for the person using it, not just the person building it. Sooo that's what we're working with at @kuron_ai. And we're just getting started ;)
1
19
We let people try Kuron without giving them a walkthrough. Here's what happened. Now a lot of founders would just launch a product and show people exactly how to use it. We wanted to do the opposite. @AshwiniNK21 gave a few people access to Kuron and let them explore it on their own. And we learned something important. People loved that Kuron could scan their website and suggest an ICP. But when one user's ICP returned 0 leads, they immediately felt they needed to broaden their targeting. That's a problem that needs a lil more attention. Because users shouldn't have to guess what to do when the first approach doesn't work. They also surfaced things we hadn't thought enough about: → Someone expected email outreach, not LinkedIn. → Someone wanted Kuron to detect their existing LinkedIn session. → Someone wanted WhatsApp notifications alongside iMessage. None of these were huge, complicated problems. But they changed how people experienced the product. And that's the thing about building with AI. You can spend months making the technology better and better. But if the first few minutes leave someone confused, none of that matters. The product has to work for the person using it, not just the person building it. Sooo that's what we're working with at @kuron_ai. And we're just getting started ;)
3
2
6
194
Prasanthi Basava retweeted
Houston, we have a launch! @kuron_ai early access goes live in 6 days. 12 months ago, I decided to build Kuron. The name means “clone” in Japanese, because the idea is to bring some of the world's best GTM experts into one AI agent and put them in your pocket. We now have 40+ experts, with their real campaigns and playbooks built into Kuron. There's plenty of AI that can send messages. Getting it to figure out who to reach out to and how to approach them is a different story. Here's what @kuron_ai does: → Describe your ideal customer in plain English → Kuron builds the list → Writes your sequences using expert playbooks → Runs outreach on LinkedIn and email → Handles replies, works through objections and books meetings Early access members get: 1. First access to Kuron on November 1 2. Their pick of playbooks from 40+ GTM experts 3. Exclusive bonuses from the Kuron team We've been working on this for a long time, and I can't wait to see what people do with it. Get early access here: kuron.ai/
5
4
14
643
99% of founders are making this mistake right now... They're spending thousands on outbound, but still have to manage the people and tools responsible for making it work. @kuron_ai is an AI GTM team that takes the entire outbound function off your plate. → Give Kuron your ICP and business context. → It identifies the right segments to target and finds prospects worth reaching out to. → It draws on the campaign knowledge and playbooks of 40+ GTM experts to decide how to approach those prospects, what messaging to use, and which sequences make sense. → It launches and runs outreach across email and LinkedIn. → It handles replies and objections, moving promising conversations toward meetings. The difference is what's behind those decisions. @kuron_ai is built around real GTM expertise, including campaign data, actual sequences, and the patterns experienced operators have learned from running outbound. That gives it a stronger starting point than generic AI working from prompts and public sales advice. You're not just getting another tool to write emails or automate sends. You're getting an AI team designed to figure out how to run outbound and execute it. Kuron is opening early access soon 👀
2
1
6
162