RACKMASK retweeted
This should re-assure Zimi users that the batch of filter media suspected of being subpar is still standards compliant and protective.
But the issue wasn't a phantom. It is real. There was an actual, if small, reduction in filtration from the usual performance of that filter media.
"these batches demonstrated filtration efficiencies of 97.44%, 98.31%, 98.55%, and 98.08%, respectively....these results show a slight decrease; nevertheless, they remain fully compliant with the KN95 standard."
Thanks to @zhouliang_mask for following up on this even though he left Zimi many months ago to start Ziga mask. And thanks to the community fit testers who noticed the deviation in PortaCount results and wanted to make sure Zimi's were still providing the protection people count on them for.
It's interesting and useful that PortaCount fit testing was sensitive enough to detect the slight decrease in filtration efficiency, but also a reminder that PortaCount testing in N99 mode won't necessarily give an OSHA passing fit factor of 100 even for NIOSH compliant N95s or GB2626-2019 compliant KN95 masks.
N95s and KN95s are allowed to have up to 5% filter penetration at 85 liters per minute of airflow. Even with a perfect face seal, 5% filter penetration would show as a "failing" fit test score in N99 mode. N99 mode can't tell the difference between allowed filter penetration and a face seal leak.
In practice, you shouldn't get full 5% filter penetration in an N99 mode fit test of an N95 fit test since, A) most N95 filter media has less than 5% filter penetration and B) you don't breathe at 85 liters per minute of airflow.
But even 1.5% filter penetration would be a failing fit test in N99 mode since only a 1% face seal leak or less is allwed. This is why N95 mode was developed for fit testing of N95s, to detect just face seal leakage. And why the Zimis could test lower than usual in N99 mode PortaCount testing, but still be compliant with the KN95 filtration standard.
Community fit testers generally use N99 mode on N95s for two reasons:
• Affordable surplus PortaCounts only have N99 mode, so we use what is available and keep the limitations of N99 mode in mind when evaluating fit test scores for series 95 masks.
•Because we want to test overall protection - how many particles get into a mask - not just meet minimum OSHA face seal leak requrements.
Some people would like fewer particles in their masks, fewer than allowed under the N95 standard, irrespective of how they get into the mask. N99 mode fit testing allows us to rate respiratory protection on a continuum from least protective to most protective.
N95 mode is a great tool for N95/KN95 fit testing and community fit testers do use it when appropriate and they have the equipment available to do it.
In the US, workplace fit testers pretty much always use N95 mode for N95s because their job is to test for face seal leaks, and only face seal leaks. OSHA requires all masks to be NIOSH approved, which thus are assumed to filter well. And N95 mode is designed to test just for face seal leaks and not filter penetration.
Today, I visited a NIOSH-certified mask manufacturing facility to further investigate the correlation between the N99 "fit scores" I personally measured and the actual filtration efficiency of the masks. Using a TSI 8130 tester, the facility’s technicians evaluated four batches of Zimi masks—the same ones that had yielded poor fit scores (ranging from 31 to 66) during my previous testing. When subjected to a salt aerosol loading test (based on the GB2626-2019 KN95 standard), these batches demonstrated filtration efficiencies of 97.44%, 98.31%, 98.55%, and 98.08%, respectively. As an engineer, while I typically state that my KN95 masks offer 98% filtration efficiency—a figure that often exceeds 99% in actual use—these results show a slight decrease; nevertheless, they remain fully compliant with the KN95 standard. This matter is now settled, and any further steps will be handled by Zimi. I have been under immense pressure recently and have faced criticism from various quarters. To those who have attacked me: I hope you never purchase Ziga masks. To those who choose Ziga masks, I guarantee that you will have an optimal wearing experience.
RACKMASK retweeted
Today, I visited a NIOSH-certified mask manufacturing facility to further investigate the correlation between the N99 "fit scores" I personally measured and the actual filtration efficiency of the masks. Using a TSI 8130 tester, the facility’s technicians evaluated four batches of Zimi masks—the same ones that had yielded poor fit scores (ranging from 31 to 66) during my previous testing. When subjected to a salt aerosol loading test (based on the GB2626-2019 KN95 standard), these batches demonstrated filtration efficiencies of 97.44%, 98.31%, 98.55%, and 98.08%, respectively. As an engineer, while I typically state that my KN95 masks offer 98% filtration efficiency—a figure that often exceeds 99% in actual use—these results show a slight decrease; nevertheless, they remain fully compliant with the KN95 standard. This matter is now settled, and any further steps will be handled by Zimi. I have been under immense pressure recently and have faced criticism from various quarters. To those who have attacked me: I hope you never purchase Ziga masks. To those who choose Ziga masks, I guarantee that you will have an optimal wearing experience.
RACKMASK retweeted
OFFICIAL PUBLIC STATEMENT
Mr. Zhou Liang completely withdrew all shares from ZIMI Mask in June 2026.
ZIMI Mask is operated by an entirely independent company.
It has no shareholding, no operation, no quality control, and no technical connection with ZIGA Mask and the brand “Zhou Liang’s Mask”.
1. Zhou Liang’s team no longer participates in the production, inspection, or quality supervision of ZIMI Mask.
2. No further technical updates, product upgrades, or iteration will be provided for ZIMI Mask.
3. All quality issues, after-sales disputes, legal liabilities, and operational risks related to ZIMI Mask shall be borne solely by the independent operator of ZIMI.
ZIGA Mask is the officially upgraded and independently operated third-generation brand of Zhou Liang.
RACKMASK retweeted
The A100-L features a minimum filtration efficiency of 99.97% under load, a maximum inhalation resistance of 100 Pa at 85 LPM, and a maximum leakage rate of 0.6%. Compared to the previous L-sized version, this new L-sized model offers a significantly improved field of vision for the wearer.
RACKMASK retweeted
Grüße gehen raus an meine #maskUp Community - wir sind viele - auch wenn es sich selten so anfühlt 🤍
Shoutouts an alle die „Durchziehen“
RACKMASK retweeted
Replying to @CarnivoraCC @gardenguarder
RACKMASK retweeted
I would ask “who is still masking” every six months.
I stopped.
Maybe I’m afraid that our group is getting smaller…
Today I ask again - where is the #MaskUp & #ThirstMasking crew?
RACKMASK retweeted
The third-generation Ziga mask—developed by Zhou Liang—incorporates ten years of technical refinement and draws on extensive feedback from consumers. Among its many upgrades, the mask now offers an expanded field of view, with impressive data to back it up. Shown below is the improvement in the field of view for the size M version; however, I believe the enhancement in the size L version will be the most remarkable of all.
RACKMASK retweeted
A little 1 year old girl toddling around in the airport today decided I was her friend and said "up?" And with the permission of her parents, I held her.
Babies don't care if you're wearing a mask or showing facial expressions, they just want to play and be cared for. 1/3
RACKMASK retweeted
A new-generation frame—this represents one of the most significant changes to Zhou Liang’s masks over the past decade. It is also the world’s first modular mask.
RACKMASK retweeted
Third-Generation Frame Mask – Zhou Liang’s Mask (Ziga)
1. Five major upgrades: manufacturing process, connection method, frame, sealing ring, and performance.
2. New manufacturing process increases breathable surface area by 2% and reduces airflow resistance by 2%.
3. KN100 model utilizes new materials, reducing resistance by 30%.
4. ZERO model adopts a new structural design; resistance is 20 Pa (KN95/XL) and 30 Pa (KN100/XL).
5. New connection method (S, M, L, XL) allows for easy switching between ear-loop and head-loop wearing styles.
6. New sealing ring material paired with the new frame improves initial fit and overall wearing comfort.
7. New frame features an updated profile, pressure-relief channels, and modular mounting holes (S, M, L, XL).
8. Upgraded "ONE" material enhances the overall structural strength of the ONE model.
9. New frame includes size and orientation indicators and offers an improved field of view.
10. Five modular insert options designed to meet personalized wearing needs.
11. Resolves the issue where the elastic strap might snap—rendering the mask unusable—when pulled backward (an issue found in Zimi masks).
12. Allows users to freely choose their preferred elastic straps.
Product Details:
1. XXS and XS sizes retain the previous welded elastic strap method.
2. XXS and XS sizes do not feature the modular frame design but retain the pressure-relief channels and the new profile design.
3. XXS and XS sizes come without valves; users can manually cut a hole to install a valve if desired.
4. Foam strips are no longer included as a free gift but are available for separate purchase.
5. Black filter elements remain available.
6. Purchasing filter elements requires having the elastic strap and frame ready.
7. Elastic straps come in two lengths (30cm and 50cm) and four material specifications: 7mm seersucker, 7mm hollow, 8mm hollow, and 7mm flat. Initial color options are white, black, and yellow. 8. Filter element (S, M, L, XL): Compatible with both headloop and earloop styles; switchable as desired.
RACKMASK retweeted
Replying to @upzen_ @SmartAirFilters
You don’t have to choose, I breathe clean air outdoors when the wildfire smoke or other air pollution is bad with my respirator
@zhouliang_mask @RackMask
RACKMASK retweeted
We conducted tensile strength tests today on the Ziga mask, focusing on one of its key upgrades: the elastic strap attachment mechanism.
1. Users can choose from and install various types of Ziga elastic straps;
2. Initial options include elastic straps in lengths of 30cm or 50cm;
3. The new attachment design allows for seamless switching between ear-loop and head-strap configurations;
4. The new design resolves the issue found with ZIMI straps, where reverse tension exceeding 10N would cause the strap to snap and the mask to break; with the Ziga design, the strap simply detaches, allowing the mask to be reassembled and reused;
5. The forward tensile strength of the new attachment exceeds 70N (well above the 10N requirement set by Chinese standards).
RACKMASK retweeted
The third-generation "Ziga" mask by Zhou Liang features a modular design that conceals the strap ends, forming a 3mm-thick ear attachment point. Available in four sizes (S, M, L, XL), it allows for seamless switching between ear-loop and head-strap configurations. It launches with a choice of three colors and three material finishes—offering a total of seven strap options for customization—allowing users to mix and match the frame, filter, and strap to create their own personalized mask.
RACKMASK retweeted
Do I think I’m convincing others with my masked selfies to start masking again?
No. I’m not delusional.
Do I think that representation still matters & hopefully normalises masking? Yes.
Do I hope it is helping others to feel seen & more confident about their own masking? Yes!
RACKMASK retweeted
Personally, I feel bad for those who have given up precautions and accepted more illness in their lives. I couldn't be happier out here living my life, completely illness free for years. Best life hack ever.
RACKMASK retweeted
imma just have to ignore the mask hostility online. every year i see more and more people in my workplace put that mask back on during surges likely bc a few of us normalized every day use.
plus i get so many compliments on my lil mask charm ☺️
RACKMASK retweeted
#ThirstMasking
The yellow sessions.
RACKMASK retweeted
Yesterday I finally got my insurance, this weekend the booking option will be installed on my website.
Counselling will be possible for everyone except people located in the US & Canada (I‘m working on this but it’s complicated).
Step by step but still going 🫡
RACKMASK retweeted
#ThirstMasking while voting
#berlinwählt






































