Springcraft (@SpringcraftAI) header
Springcraft (@SpringcraftAI) profile picture

Building the platform for physical AI

Palo Alto, CA
Joined October 2025
Photo by Springcraft (@SpringcraftAI)
We asked robot builders what took way longer than it should have. One spent three days rewriting his code and building a simulator, only to find the problem was never in the software. Here’s what else slowed them down 👇 springcraft.ai/follow/builde…
10
The Springcraft Robotics Mixer is back in the Bay Area on Dec 8. Roboticists, hardware hackers, and physical AI builders, come share what you’re building and meet the people making machines move. No pitches, just actuators. ⚙️ luma.com/xo9aizvt #physicalAI #robotics
26
Great to see @jiageng_zh25747’s $800 biped stepping on real hardware 🦿 The sim2real gap showed up as shuffling feet, and he worked through it one physical detail at a time with belts, foot contact, and motor inertia. Getting the hardware right in sim is so much of the work.
Stepping gait now works on the real robot. Sim2real standing was shuffling. What actually fixed stepping: — belt stiffness modeled — foot restitution modeled — armature: vendor value, not my measured one 6-DOF point-foot biped, ~$800, built solo with an AI coding agent.
1
26
"When you have to deal with the hardware at hand" is so much of robotics, and @chloepilonv found a really clever way through it, turning an arm and a quadruped into one trash picker 🛠️ The easier it gets to fit a robot's form to the task, the more ideas like this become real.
First look at the autonomous trash picking solution in action. About its reachability, or "when you have to deal with the hardware at hand" : - Added extended links to the arm for a longer reach while keeping a reasonable payload capacity - Defined a reachability region for the arm around the quadruped - Made the quadruped crouch when the target object is detected inside that region PS: The camera cable stresses me out too - Moving to an onboard Raspberry Pi 5 setup. With a quadruped Go2 @UnitreeRobotics from @nebiusai @DhruvDiddi and arm SO101 @LeRobotHF :)
1
40
Springcraft is building the foundation for the next generation of machines. Plug-and-play parts, a sim that matches your bench, and a spec builders can share. Join us! We're hiring founding Manufacturing, Mechanical, and Software Engineers 🛠️ springcraft.ai/careers/
1
80
A spec anyone can build to. It defines how every part connects, talks, and behaves, so anything built to it is cross-compatible. Builders share designs, code, and trained policies, so solutions propagate. Take apart your robot and build a new one from the same parts.
1
7
Hardware that behaves like software. Plug a part in and the system knows what it is and how to talk to it. Every part reports its own health and calibrates on the fly. Your time goes to building a machine, and every part is yours to modify and repair.
1
1
58
A sim that matches your bench. Design and drive your machine before any hardware arrives. Every part ships with its own sim model, and the sim runs the same firmware as the real thing. The machine on your bench behaves like the one on your screen.
1
7
Robotics today gives you two options. Buy someone else's finished machine, or buy a pile of parts and spend months making them work together. That gap is exactly where builders live. So that's where we started: the parts underneath and the layer that makes them work together 🧵
1
1
3
84